Petroleum Industry Overview eLearning Library

Duration: 2 hours

In Modern Oil and Gas Industry, you will learn about the historical, geographical, and modern context of the petroleum industry; its organization, the petroleum value chain, and economic drivers.

Duration: 1 hour

In The E&P Asset Life Cycle, you will learn about asset life cycle economics and the phases of the asset life cycle, including: exploration, appraisal, development and production, and mature production and enhanced oil recovery.

Duration: 1 hour

In Reservoir Fluids, you will learn about reservoir fluids, physical and chemical properties, and the impact on these properties at reservoir and surface conditions.

Duration: 4 hours

In Petroleum Geology, you will learn about Earth structure and plate tectonics; types of rocks, the rock cycle, clastic, biogenic, and chemical source sedimentary rocks; and historical geology, including superposition, index fossils, depositional environments, and global vs. regional stratigraphy.

Duration: 5 hours

In Petroleum Reservoirs, you will learn about basins and plays, unconventional resources, and petroleum systems; reservoir rock properties: porosity and permeability, grain size, distribution, and sorting; and fluid distribution and flow characteristics. You will also learn about structural and stratigraphic traps, reservoir mapping, reservoir phase behavior and fluid properties, reservoir classification, and phase diagrams.

Duration: 3 hours

In Exploration Rights and Surface/Subsurface Technologies, you will learn about basins, plays, and risk analysis, mineral ownership, and contracts; surface exploration technologies, such as gravity, magnetic, and geochemical surveys, and seismic imaging and interpretation; and subsurface technologies such as mud logging, appraisal wells, coring, well logging, and drill stem testing.

Duration: 3 hours

In Drilling Operations and Systems, you will learn about well function, drilling history, onshore and offshore drilling, drilling programs, drilling rig components, and drilling systems; including drilling, rotating, fluid, and blowout prevention systems.

Duration: 1.5 hours

In Well Completion and Stimulation, you will learn about casing and cementing, wellhead installation, types of well completions, formation damage and well perforation, sand control problems and strategies, and well stimulation.

Duration: 1 hour

In Production Technology: Flowing Wells and Artificial Lift you will learn about production roles; artificial lift, including beam pumps, gas lift, and submersible pumps; and production logging and workover operations.

Duration: 1 hour

In Hydrocarbon Recovery Mechanisms, you will learn about primary recovery drives such as dissolved gas (solution gas) drive, water drive, gas cap expansion drive, and combination drives. You will also learn about enhanced oil recovery, including secondary and tertiary recoveries such as water flood, miscible flood, steam cycle, and steam drive, along with expected recovery efficiencies.

Duration: 1 hour

In Surface Processing of Produced Fluids, you will learn about the integrated production system, fluid separation, emulsion breaking, crude products, gas separation and natural gas processing, NGL usage, and natural gas conversion to LNG and GTL.

Duration: 3 hours

In Overview of the Midstream Industry Segment, you will learn about the Petroleum Value Chain, the midstream segment, conventional and unconventional reservoirs, the crude oil and natural gas value chains and value chain investment trends; natural gas terminology, global energy demand and trade, gas production and contracts; and gas processing, including end use products, contaminants and sales gas specifications, gas conditioning, dehydration, hydrocarbon dewpoint control, NGL extraction and stability, and NGL product treating.

Duration: 2 hours

In Pipelines and Storage Systems, you will learn about the different hydrocarbon transportation systems, advantages of pipelines, pipeline projects, pipeline construction and types of pipelines; pipeline system design and components; pipeline problems and protection; and pigging. In addition, you will learn about hydrocarbon storage systems for liquids and gases, including appropriate types of tank designs and use of depleted reservoirs and salt caverns.

Duration: 3 hours

In Gas Processing Overview, you will learn about saleable products recoverable from raw, produced gas; gas composition and contaminants; sales gas specifications; gas sweetening and dehydration; hydrocarbon liquid products and extraction processes, Nitrogen removal and helium recovery; NGL fractionation/stabilization; NGL product treating; and sulfur recovery and disposal.

Duration: 2 hours

In Fundamentals of Refining, you will learn about the refining industry as part of the downstream petroleum value chain including characteristics of crude oil and the refining products made from it, refining economics, a typical refinery configuration with its process streams and units.

Duration: 1 hour

Steam cracking is the main production process for petrochemicals, including ethylene, propylene and  butadiene. The process involves breaking long chain hydrocarbons into shorter chains. In "Steam Cracking", you will learn about types of steam crackers and the functions performed in key areas, including the furnace, quench, compression, and chilling and separation sections. You will also learn about the difference between conversion and selectivity and the factors that affect ethane selectivity.

Duration: 2 hours

In Introduction to the Petrochemical Industry, you will learn about the processes and equipment that make up the petrochemical industry. You will be introduced to petrochemical products, including plastics, resins, fibers, and foams; base chemicals and their derivatives, and primary petrochemical feedstocks. You will also review petrochemical chemistry, and learn about petrochemical economic drivers. Finally, you will learn about petrochemical manufacturing; including refinery and chemical processes, such as cat cracking, reforming, isomerization, steam cracking, and extraction.

Duration: 2 hours

In Introduction to Solvents, you will learn about basic solvent chemistry, its purpose and selection. Solvent chemistry, including types of bonds, electronegativity, and polar bonds are covered. Polar (protic and aprotic) and non-polar types of solvents are explained, as well as what defines organic and inorganic solvents. Chemical and hydrocarbon solvent properties, are covered, such as viscosity, solubility, relative evaporation rate (RER), density, and surface tension, along with health, safety, and environmental considerations. Finally, you will learn about solvent applications, such as paints, sealants, cleaners, and polishes; drilling and metalworking fluids; water treatment; pesticides; concrete release fluids, and heat transfer fluids.

• AC Motors for Operators
• Air Compressors
• Centrifugal Compressors: Introduction
• Centrifugal Compressors: Construction and Operation
• Centrifugal Pumps: Equipment and Operation
• Centrifugal Pumps: Introduction
• Combustion Gas Turbines: Equipment and Operation
• Combustion Gas Turbines: Introduction
• Condensers
• Couplings, Gear Trains, and V-Belts: Gear Trains and V-Belt Drives
• Couplings, Gear Trains, and V-Belts: Machine Connections and Couplings
• Electrical Fundamentals
• Electrical System Basics and Diagrams
• Heat Exchangers: Introduction
• Heat Exchangers: Operations and Maintenance
• Hydrocarbon Chemistry 101
• Instrumentation: Analyzers and Inferentials
• Instrumentation: Measuring Liquid Level
• Instrumentation: Measuring Pressure
• Instrumentation: Measuring Temperature
• Instrumentation: Process and Instrumentation Drawings
• Instrumentation: Regulatory Control
• Instrumentation: Fundamentals of Control
• Instrumentation: Measuring Flow
• Internal Combustion Engines: Introduction
• Internal Combustion Engines: Operating Techniques
• Introduction To Compression
• Introduction to Dynamic Pumps
• Job Hazard Analysis and Stop Work Authority
• Leak Detection and Repair
• Lubrication Concepts
• Mechanics of Fluids: Fluids in Motion
• Mechanics of Fluids: Introduction to Process Fluids
• Mechanics of Fluids: Static Pressure and Head
• Mechanics of Fluids: Units of Fluid Measurement
• Mechanics of Fluids: Behavior of Gases
• Nature of Heat: Fuels and Combustion
• Nature of Heat: Heat and Temperature
• Nature of Heat: Heat Exchange Equipment
• Nature of Heat: Heat Transfer
• Plant Radio Communication
• Positive Displacement Compressors: Construction and Operation
• Positive Displacement Compressors: Introduction

• Electrical Centrifugal Subsurface Pumps: Equipment
• Electrical Centrifugal Subsurface Pumps: Ammeter Recording and Charts
• Electrical Fundamentals
• Flowing Wells: Chokes
• Flowing Wells: Introduction to Pressure and Flow
• Flowing Wells: Operating Flowing Wells
• Flowing Wells: Packers and Valves
• Flowing Wells: The Wellhead, Wellbore, and Christmas Tree
• Flowing Wells: Pressure and Flow in Producing Wells
• Fundamentals of Fluids for Production Operations: Fluid Behavior
• Fundamentals of Fluids for Production Operations: Gases and Static Pressure
• Gas Lift: Equipment
• Gas Lift: Fundamentals
• Gas Lift: Operating Techniques
• Gas Measurement: Electronic Flow Measurement
• Gas Measurement: Equipment and Calculations
• Gas Measurement: Fundamentals
• Gas Measurement: Orifice Flow Calculations
• Gas Measurement: Orifice Meters
• Gas Measurement: Witnessing
• Glycol Dehydration
• Heater Treaters: Fundamentals
• Heater Treaters: Types and Operation
• Hydraulic Subsurface Pumping Systems: Downhole Pumps and Engines
• Hydraulic Subsurface Pumping Systems: Installation and Testing
• Hydraulic Subsurface Pumping Systems: Pump Performance
• Hydraulic Subsurface Pumping Systems: Surface and Tubing Equipment
• Introduction to Service Rig Operations
• Lease Automatic Custody Transfer (LACT)
• Lease Instrumentation: Control Equipment
• Lease Instrumentation: Final Control Devices
• Lease Instrumentation: Sensing and Measuring Equipment
• Oil and Gas Production Overview
• Oil and Gas Reservoirs: Barriers and Traps
• Oil and Gas Reservoirs: Fundamentals
• Oil and Gas Separators
• Oil Field Corrosion
• Oil Field Electricity: Conservation and Classification
• Oil Field Electricity: Electrified Equipment
• Oil Field Electricity: Fundamentals
• Oil Field Electricity: Offshore Oil Field Electricity
• Oil Well Performance and Surveillance: Equipment
• Oil Well Performance and Surveillance: Fundamentals
• Oil Well Performance and Surveillance: Testing
• Plate Tectonics
• Process Component Safety Analysis and System Testing
• Production Facility Gas Processing
• Production Safety Equipment and Support Systems
• Production Safety Systems Regulations and Device Identification
• Reducing Marine Trash and Debris
• Safety Device Operation
• SEMS Standard and Requirements
• Testing and Setting Safety Devices
• Vapor Recovery Systems
• Water Treatment and Disposal: Facilities and Testing
• Water Treatment and Disposal: Fundamentals
• Water Treatment and Disposal: Processes and Equipment
• Well Control and Production Safety Regulations
• Well Pumping: Introduction to Sucker-Rod Systems
• Well Pumping: Operating Sucker-Rods
• Well Pumping: Sucker-Rod Pump Performance
• Well Pumping: Sucker-Rod Surface Equipment
• Well Pumping: Sucker-Rod Systems
• Wireline and Sonar Well Operations

• Catalytic Reforming
• Cleaning Activities
• Cooling Towers: Introduction
• Cooling Towers: Water Conditioning
• Corrosion Control
• Cost Reduction for Operators
• Fire Fighting: Extinguishing Agents
• Fire Fighting: Fuels and Combustion
• Fire Fighting: Portable Fire Extinguishers and Foams
• Fire Fighting: Strategies
• Fire Fighting: Tactics
• Fired Heaters: Equipment and Design
• Fired Heaters: Operating Techniques
• Flange Piping
• Fluid Catalytic Cracking
• Furnace Operations: Working With Furnaces
• Introduction to Furnace Operations
• Performing Skills Assessment
• Pipe Fitting Basics
• Practical Distillation: Abnormal Operations
• Practical Distillation: Behavior of Hydrocarbons
• Practical Distillation: Fractionating Equipment
• Practical Distillation: Normal Operations
• Practical Distillation: Operating Procedures
• Practical Distillation: Principles and Practices
• Practical Distillation: Concepts and Quality
• Process Control Tests
• Process Operator Responsiblities
• Process Plant Chemistry
• Safe Laboratory Operations
• Safe Tank Cleaning: Cleaning the Tank
• Safe Tank Cleaning: Gas-Freeing
• Safe Tank Cleaning: Hazardous Materials
• Safe Tank Cleaning: Preparing for Cleaning
• Small Threaded Pipe
• Statistical Process Control
• Tubing
• Valve Maintenance
• Wastewater Treatment: Biological Treatment Process
• Wastewater Treatment: Preliminary Treatment
• Wastewater Treatment: Process Control
• Wastewater Treatment: Testing and Troubleshooting

• Basic Core Analysis
• Coring and Core Preservation
• Drilling Fundamentals: Part 1
• Drilling Fundamentals: Part 2
• Introduction to Artificial Lift
• Introduction to Hydraulic Fracturing
• Offshore Systems
• Plate Tectonics
• Porosity
• Special Core Analysis
• Subsea Systems
• Well Completion and Stimulation Fundamentals
• Well Stimulation Methods
• Wellhead Components

• Actuators
• Ambient and Process Chillers
• Analyzer Sampling and Conditioning System
• Analyzer Shelters
• Arc Flash Causes and Mitigation
• Basic Electronics
• Batteries
• Bearings
• Blinding and De-blinding
• Cable Duct Banks and Trays
• Capacitor Banks
• Cathodic Protection Systems
• Chlorine Analyzers
• Circuit Breakers
• Columns and Process Vessels
• Compressed Air Dryers
• Condition Monitoring - Agitators and Mixers
• Condition Monitoring - Balancing
• Condition Monitoring - Compressors
• Condition Monitoring - Electrical Motors
• Condition Monitoring - General
• Condition Monitoring - Pumps
• Condition Monitoring - Turbines, Fans and Blowers
• Conductivity Analyzers
• Control Loops
• Control Systems - SCADA, DCS and ESD
• Cooling Towers for Technicians
• Corrosion in Metal
• Custody Meters
• Diesel Engine Generators
• Differential Pressure Flow Measurement
• Dissolved Oxygen Analyzers
• Drive Couplings
• Dust and Coalescer Filters
• Dynamic Compressor Systems, Seals and Routine Tasks
• Dynamic Compressors: Introduction and Operation
• Dynamic Pumps
• EI&A Field Awareness
• Electrical Cables
• Electrical Documentation
• Electrical Heat Tracing
• Electrical Level Measurement
• Electrical Motor Properties, Troubleshooting and Maintenance
• Electrician's Tools and Test Equipment
• Emergency Backup
• Emergency Power Systems
• Engineering Drawings and Symbols
• Extruder Equipment
• Extruder Equipment Maintenance
• Fans and Blowers
• Fans and Blowers Maintenance
• Fasteners
• Fault Diagnosis, Troubleshooting and Machine Inspections
• Fiber Optic Cable
• Filters and Strainers
• Fire Detection
• Fire Protection Systems
• Flame Scanning Devices
• Flow Gauging (Rotameter)
• Forklifts
• Fundamentals of Condition and Predictive Monitoring
• Fundamentals of Demineralized Water Treatment Systems
• Fundamentals of Reverse Osmosis Systems
• Fundamentals of Vibration Measurement
• Fundamentals Principles of Instrument Calibration 
• Gala Pellet Dryer for Technicians
• Gas Chromatography
• Gas Density Analyzers
• Gas Detection
• Gas Insulated Substations (GIS) and Sulfur Hexafluoride (SF6)
• Gas Turbines for Technicians
• Gaskets and Packing
• Gears
• Grounding
• Hand and Power Tools for Technicians
• Hazardous Area and Protection Classifications
• Heat Exchangers for Technicians
• High Voltage Gas Insulated Switchgear (GIS)
• High Voltage Substation Switchgear
• HVAC Fundamentals
• Hydraulic Systems
• Hydrostatic Head Level Measurement
• Hydrostatic Head Level Measurement - Device Troubleshooting and Calibration
• Hyper Compressor
• Industrial Elevators
• Insulation and Thermal Protection
• Introduction to AC/DC Electrical Motors for Technicians
• Introduction to Auxiliary Boiler Systems
• Introduction to Supervisory Control and Date Acquisition (SCADA)
• Laydown Yards and Area Management
• Leak Detection in Refrigeration Lines
• Lightning Arrester
• Liquid Nitrogen Storage Systems
• Low Voltage Substation Switchgear
• Lubrication Systems, Classifications and Applications
• LV Intelligent Switchgear
• Machine Alignment
• Maintaining HVAC Systems
• Maintaining Storage Tanks
• Maintenance Fundamentals
• Manuals and Drawings
• Mass Flow Measurement
• Measurement and Calibration Basics
• Measuring Tools
• Mechanical Hoses
• Medium Voltage Substation Switchgear
• Medium Voltage Vacuum Contactors
• Melting Flow Rate Analyzers
• Microwave and Laser Level Measurement
• Mixers and Blenders
• Moisture Analyzers
• Motor Signature Analysis (MCE)
• Network and Communication Systems
• Nuclear Radiation Level Measurement
• Oxygen Analyzer
• Pelletizers
• pH Analyzers
• Photometric Analyzers
• Pipe Supports
• Pipes and Fittings
• Planned, Corrective, and Breakdown Maintenance
• Plant Lighting
• Pneumatic Control Systems
• Pneumatic Systems
• Pneumatic Tubing and Fittings
• Point Level Switches
• Positive Displacement Pumps for Technicians
• Potable Water Treatment System
• Power and Distribution Transformers
• Power Cables
• Pressure Measurement
• Pressure Relief Safety Devices
• Preventative Maintenance Plans
• Protective Relays
• Purging Storage Tanks
• Radio and Communication Systems
• Reactors
• Reciprocating Compressors
• Regenerative Thermal Oxidizer
• Reports and Communication
• Rotary Feeder
• Rotary Stem Valves for Technicians
• Rotating Equipment Condition Diagnosis
• Safety in Instrumentation and Control Systems
• SCADA Operation
• Sealing Devices (Gaskets)
• Security Systems
• Shell and Tube Heat Exchangers
• Sight and Float Gauging
• Simple Control System (PLC)
• Sliding Stem Valves for Technicians
• Spark Plugs
• Special Valves
• Steam Boilers
• Steam Condensate Hazards and Removal
• Steam Traps
• Steam Turbine Controls
• Steam Turbines for Technicians
• Storage Tanks
• Structural Safety
• Tank Gauging System
• Tank Roof Inspection
• Temperature Measurement
• Transformer Maintenance
• Ultrasonic Level Measurement
• Understanding pH Measurement
• Uninterruptible Power Supply
• Utility and Instrument Air Systems
• Valve Accessories
• Valve Design and Characteristics
• Valves Inspection, Testing and Repair
• Variable Speed and Frequency Drives (VFD/VSD)
• Vent System and Rundown System
• Volumetric Flow Measurement
• Water Softening Systems
• Weigh Bridges, Docks Levelers & Scales
• Weighing Devices
• Workshop Tools and Equipment

• Amine Sweetening Process
• Fractionation in Gas Processing
• Gas Processing Hazards
• Gas Processing Thermodynamics
• Hydrocarbon Phase Behavior and Vapor-Liquid Equilibrium
• Introduction to Gas Processing for Operations
• Molecular Sieve Dehydration
• Solid Bed Adsorption and TEG Dehydration
• Turboexpander Gas Processing Plant

• Atmospheric and Pressure Storage Tanks
• Automated Control Applications
• Chemical Injection Systems
• Coalescing Filters
• Condensate Stabilization System
• Dewpoint Testing/Requirements
• Electrical Load Centers and Panelboards 
• Electrical System Basics and Diagrams
• Electrical System Protection
• Flare System Fundamentals
• Flare System Hazards and Ignition
• Flare System Purging Startup and Shutdown
• Flowing Pipeline Hydraulics
• Fractional Distillation Process Fundamentals
• Fundamentals of Hazardous Area Classifications 
• Gas Compressor Performance
• Glycol Dehydration Equipment and Operation
• Glycol Injection System Operation
• Glycol Sampling and Testing
• Heat Medium and Hot Oil Systems
• Heat Medium System Operation
• High Pressure Gas Sampling
• High Pressure Liquid Sampling
• Hydrates
• Introduction to Computerized Control Systems
• Introduction to Gas Chromatography
• Introduction to Measurement: Density, Moisture, pH, and Conductivity
• Introduction to Measurement: Level and Flow
• Introduction to Measurement: Temperature and Pressure
• Introduction to Pigging
• Introduction to Pipeline Hydrocarbons
• Introduction to Pipeline Systems
• ISO Truck Tank Construction and Inspection
• Liquid Storage Systems
• Manifold Systems Overview
• Measurement Basics and Standards
• Mercaptan Odorizing Systems
• Methanol Injection
• Motor Control Centers (MCCs) 
• Natural Gas Liquids (NGL) Truck Offloading
• Non-Destructive Examination (NDE)
• Operating Hydrogen Sulfide (H2S) Tube Samplers
• Pentane (C5)+ Truck Loading
• Pig Launching and Receiving
• Pipeline Batching
• Pipeline Bridge Systems
• Pipeline Commissioning
• Pipeline Crossings
• Pipeline Flow Characteristics and Static Pipeline Hydraulics
• Pipeline Hydrocarbon Measurement and Testing
• Pipeline In-Line Inspection Tools
• Pipeline Input/Feed and Export Systems
• Pipeline Isolation
• Pipeline Purging with Nitrogen
• Process Control Strategies
• Produced Water Treatment
• Propane and Butane Truck Loading
• Propane Refrigeration Units and Low Temperature Separators (LTS)
• Pumping Out Flare Knockout Drums
• Rail Car Inspection
• Rail Car Loading and Offloading
• Rail Car Sampling and Composition Testing
• Recycle Compressor Operation
• Reflux in Fractionation Operations
• Remote Pipeline Startup and Shutdown
• Roto-Launch Automatic Multiple Pig Launcher
• Sales Gas Compressor Operation
• Sales Gas Compressor Types, Use and Limitations
• Sales Gas Filter Replacement
• Salt Caverns and Underground Storage
• Screw Compressor Components and Auxiliary Equipment
• Solid Desiccants
• Tank Isolation
• Tank Venting Systems
• Testing Composition of Offloading Truck NGLs
• Tower Fouling and Corrosion Cleaning
• Turbidity Measurement
• Two Phase and Three Phase Separators
• Underground Storage Tank Inspection and Monitoring
• Water Removal from a Storage Tank Bottom

Process Safety in Operations:

• Audits and Key Performance Indicators
• Emergency Response and Incident Investigation 
• Hazards
• Introduction
• Management of Change
• Projects, Construction and Operations
• Risk Management

• Gasoline Blending Operations
• Refinery Process Overview:
  • Catalytic Reforming
  • Fluid Catalytic Cracking
  • Gasoline Blending
  • Introduction
  • Refinery Process Hazards
  • Crude Distillation
• Solvent Deasphalting
  • Introduction
  • Analytical Methods and Sample Frequency
  • Primary Equipment
  • Process Operations
  • Process Variables
  • Unit Hazards
• Sulfur Recovery and Tail Gas Processing Overview
• Sulfuric Acid Plant:
  • Auxiliary Equipment
  • Introduction and Process Overview
  • Primary Equipment
  • Process Safety
• SYDEC Delayed Coking Process:
  • Overview
  • Auxiliary Equipment
  • Consequences of Deviation
  • Operations
  • Primary Equipment
  • Process Hazards
• Turnaround Operations

• Access to Medical Records
• Accident Control Techniques: Introduction
• Accident Control Techniques: Safe Work Practices
• American Chemistry Council: Responsible Care
• Asbestos
• Assessing Occupational Exposure
• Benzene
• Combustible Dust Hazards
• Confined Space Entry
• DOT Drug and Alcohol Testing
• DOT Hazardous Materials Employee Safety
• DOT Hazardous Materials General Awareness
• DOT Hazardous Materials Transportation Security Awareness
• Driving Safety
• EHS Regulatory Overview
• Electrical Safety for Qualified Employees
• Electrical Safety for Unqualified Employees
• Emergency Action Plans, Alarm Systems, and Fire Prevention Plans
• Environmental Awareness
• Excavation and Trenching
• Excavation and Trenching for Operations Personnel
• Explosive and Flammable Chemicals
• Export Compliance and Global Trade Guidelines
• Eye and Face Protection
• Eye Wash and Safety Showers
• Fall Prevention
• First Aid Procedures
• Forklifts and Powered Industrial Trucks
• Hand and Power Tool Safety
• Hand Safety
• Hazard Communication
• Hazards of Naturally Occurring Radioactive Materials (NORM)
• Hazwoper: Awareness
• Hazwoper: Operations
• Hazwoper: Overview
• Hearing Protection
• Heat Stress Safety
• Helicopter Safety
• Hot Work
• Hydrogen Sulfide (H2S)
• Incident Reporting and Investigation
• Industrial Ergonomics
• Industrial Hygiene
• Introduction to Hazmat Transportation Regulations
• Introduction to Process Safety Management (PSM)
• Ionizing Radiation
• Irritants, Corrosives, and Sensitizers
• Jet Fuel Quality Control
• Laboratory Safety
• Ladder Safety
• Ladder Safety for Construction
• Line Breaking
• Lockout/Tagout
• Manual Handling and Lifting Techniques
• Naturally Occurring Radioactive Materials (NORM)
• Nitrogen Safe Use and Handling
• Occupational Exposure to 1,3-Butadiene
• Occupational Exposure to Bloodborne Pathogens
• Occupational Exposure to Carcinogens
• Occupational Exposure to Chlorine
• Occupational Exposure to Formaldehyde
• Occupational Exposure to Hexavalent Chromium
• Occupational Exposure to Hydrochloric Acid
• Occupational Exposure to Lead
• Occupational Exposure to Respirable Crystalline Silica
• Occupational Exposure to Respirable Crystalline Silica - General Industry
• Occupational Exposure to Sodium Hydroxide (Caustic Soda)
• Occupational Exposure to Sulfur Dioxide
• Occupational Exposure to Sulfuric Acid
• Office Ergonomics
• Office Fire Safety
• Office Safety
• Offshore Water Safety
• Oxygen-Fuel Gas Welding and Cutting
• Personal Protective Equipment
• Portable Fire Extinguishers
• Portable Fire Extinguishers: Non-Emergency Responder
• Process Safety and Fatigue Management
• Process Safety and Fatigue Management for Supervisors
• RCRA Emergency Response
• RCRA Generators
• RCRA Transporters
• RCRA Treatment, Storage, and Disposal Facilities
• Respiratory Protection
• Rigging, Slings and Crane Lifts
• Scaffolding
• Security Training:  All Personnel
• Security Training: Facility Security Officer Overview
• Security Training: Security Personnel
• Specifications for Accident Prevention Signs and Tags
• Spill Prevention, Control, and Countermeasures
• Storage and Handling of Anhydrous Ammonia
• Toxic Chemicals
• Toxic Substances Control Act (TSCA)
• Unstable and Reactive Chemicals
• Vehicle-Mounted Elevated Work Platforms and Aerial Lifts
• Walking/Working Surfaces
• Warehouse Safety
• Working on Scaffolds
• Workplace Violence

• Access to Medical Records - UK
• Asbestos - UK
• Assessing Occupational Exposure - UK
• Benzene - UK
• Confined Space Entry - UK
• Driving Safety - UK
• Electrical Safety for Qualified Employees - UK
• Electrical Safety for Unqualified Employees - UK
• Environmental Awareness - UK
• Excavation and Trenching - UK
• Explosive and Flammable Chemicals - UK
• Eye and Face Protection - UK
• Eye Wash and Safety Showers - UK
• Fall Prevention - UK
• First Aid Procedures - UK
• Forklifts and Powered Industrial Trucks - UK
• Hand Safety - UK
• Hazardous Waste Spill Response, Containment and Decontamination - UK
• Hearing Protection - UK
• Heat Stress Safety - UK
• Helicopter Safety - UK
• Hot Work - UK
• Hydrogen Sulphide (H2S) - UK
• Incident Reporting and Investigation - UK
• Industrial Ergonomics - UK
• Industrial Hygiene - UK
• Ionising Radiation - UK
• Irritants, Corrosives, and Sensitizers - UK
• Laboratory Safety - UK
• Ladder Safety - UK
• Line Breaking - UK
• Lockout/Tagout - UK
• Manual Handling and Lifting Techniques - UK
• Naturally Occurring Radioactive Materials (NORM) - UK
• Nitrogen Safe Use and Handling - UK
• Occupational Exposure to 1,3-Butadiene - UK
• Occupational Exposure to Bloodborne Pathogens - UK
• Occupational Exposure to Carcinogens - UK
• Occupational Exposure to Chlorine - UK
• Occupational Exposure to Formaldehyde - UK
• Occupational Exposure to Hexavalent Chromium - UK
• Occupational Exposure to Hydrochloric Acid - UK
• Occupational Exposure to Lead - UK
• Occupational Exposure to Sodium Hydroxide (Caustic Soda) - UK
• Occupational Exposure to Sulphur Dioxide - UK
• Occupational Exposure to Sulphuric Acid - UK
• Office Ergonomics - UK
• Office Fire Safety - UK
• Office Safety - UK
• Offshore Water Safety - UK
• Overview of Hazardous Waste Operations and Emergency Response - UK
• Oxygen-Fuel Gas Welding and Cutting - UK
• Personal Protective Equipment - UK
• Portable Fire Extinguishers - UK
• Portable Fire Extinguishers: Non-Emergency Responder - UK
• Process Safety and Fatigue Management - UK
• Process Safety and Fatigue Management for Supervisors - UK
• Respiratory Protection - UK
• Rigging, Slings and Crane Lifts - UK
• Specifications for Accident Prevention Signs and Tags - UK
• Spill Prevention, Control, and Countermeasures - UK
• Storage and Handling of Anhydrous Ammonia - UK
• Toxic Chemicals - UK
• Unstable and Reactive Chemicals - UK
• Vehicle-Mounted Elevated Work Platforms and Aerial Lifts - UK
• Walking/Working Surfaces - UK
• Warehouse Safety - UK
• Workplace Violence - UK